Publicidad
Idiomas disponibles
Idiomas disponibles
Description
Display
Indicators
Constant: Stand-By Mode activated. Regulation
is paused.
Flashing: Controlled stop process for the regu-
lation in progress.
Constant: Cold room door open.
Flashing: The door has been open for a longer
time than defined in parameter A12.
There is an active alarm, but not an active HACCP
alarm.
Constant: HACCP alarm active.
Flashing: HACCP alarm recorded and unconfir-
med. Press the
alarm.
Constant: The SELFDRIVE mode is active.
Flashing: An error has been detected in the SEL-
FDRIVE mode.
Constant: Evaporator fans active.
Flashing: The evaporator fans should be active
but a delay is preventing this.
AKO-16524A, AKO-16525A: Bluetooth activated (only with CAMM module).
AKO-16525AN : ON: Device registered on the NBIoT network and with a valid licence.
Keypad
key to confirm an HACCP
OFF: Unable to register on the NBIoT network or the licence has expired.
Constant: The cold solenoid is active.
Flashing: The solenoid should be active but a
delay or protection is preventing this.
Constant: Compressor active.
Flashing: The compressor should be active but
a delay or protection is preventing this.
Defrost relay active.
Continuous cycle mode active.
Cold room light active.
Alarm in progress muted.
Temperature displayed in ° Fahrenheit / º Cen-
tigrade.
Programming mode active.
Constant: CAMM module in operation.
Flashing: Malfunction in CAMM module.
20
1652H4A11 Ed. 10
Publicidad
