Descargar Imprimir esta página

Skyfood SI-282HDE-1 Manual De Instrucciones página 17

Publicidad

Cheville de la Table Fixe
Re rer la Cheville la levant ver calment vers le haut de la Table Fixe, voir figure 05.
Table Fixe
Lever la par e frontale de la Table Fixe, voir figure 06, ver calment (voir la flèche) pour
relâcher l' entrave inférieure. Après, rer la Table Fixe en avant ( voir la flèche) pour sor r
complètement la Table, voir figure 07.
FIGURE 06
Lame
Tourner le Manipule du Calibreur de la Lame No 01 (Fig.01) dans le sense an -horaire
jusque la lame soit libre pour être re rée.
Employer des gants en maille d' acier pour prendre la Lame
Volant Supérieur
Après avoir re ré la Lame prendre fermement le Volant Supérieur No.05 (Fig.01) le
poussant vers le haut, ensuite poussez-le vers le devant de la scie.
Volant Inférieur
Re rez l' a ache No.01 (Fig.08) prenez fermement le Volant Inférieur et poussez-le en
avant, voir figure 09.
52
All manuals and user guides at all-guides.com
FIGURE 05
FIGURE 07
IMPORTANT
signs of wearing.
When checking the tension of belts or chains DO NOT insert your fingers between belts
and pulleys, nor between the chains and gears.
Check protec ons and safety devices to make sure they are working properly.
4.4 Opera on
4.4.1 Warnings
Do not use the machine with long hair that could touch any part of the machine. This might
lead to a serious accident. Tie your hair up well and/or cover it with a scarf.
Only trained or skilled personnel shall operate this machine.
Never touch turning parts with your hands or any other way ,
NEVER operate the machine without any original safety devices under perfect condi ons.
4.5 A er Finishing The Work
4.5.1 Precau ons
Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket.
Never clean the machine unless it has come to a complete stop.
Put all the components back to their func onal posi ons before turning the machine ON
again.
Check the level of oil.
Do NOT insert your fingers in between belts and pulleys nor chains and gears.
4.6 Maintenance
4.6.1 Danger
Any maintenance with the machine in working situa on is dangerous. TURN IT OFF BY
PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
Always remove the plug from the socket in any emergency situa on.
IMPORTANT
17

Publicidad

loading