DeLonghi Pinguino T90 Instrucciones De Uso página 19

THE CONTROL PANEL
A ON/OFF button
B Mode selection button
D BOOST (superconditioning) mode indicator light
H Timer in operation indicator light
time
L Timer button
M Temperature display
N Humidity display
0 Reduce temperature/humidity/programmed operating time button
P/Q/R/S Fan speed and AUTO mode indicator lights
T Fan speed selection button
U "SWING" button to move grille flaps (model Tl OOECO only)
NB: The "SWING" button (U) moves the grille flaps to distribute the cool air uniformly In the room.
When the button (U) is pressed and the flaps have begun moving alternately forwards and
backwards, pressing the button again will lock the flaps in their current position.
Pressing the button again will restart the flaps moving forwards and backwards.
When the appliance is turned off, they will close irrespective of their position.
Operation
- Pressing the ON/OFF button ( d)) turns the appliance on or off.
control panel, the LED dorresponding to the selected speed lights up.
- The SET buttons (+) and (-) increase or reduce temperature or humidity
Each time the button is pressed, the appliance confirms the selection with a beep and the light
on the remote control unit comes on.
NB: The remote control unit can be used for the following functions only: to turn the appliance
indicator light--
Replacing the batteries
remote control unit
• replace the fiat batteries with two AAA 1.5
V batteries, making sure they are In the
correct position (see instructions inside the
battery compartment);
FAN bu#on
SET -button
w ON/OFF button
SET + button
6
0
21