Fronius F/FSC Manual De Instrucciones página 20

Safety
Safety
Work that is carried out incorrectly may result in serious injury or damage to pro-
perty.
▶
▶
▶
An electric shock can be fatal.
Before starting work:
▶
▶
▶
A welding torch that has become very hot through use can cause severe burns.
▶
Risk of injury from poor connections.
▶
NOTE!
The adapters are only designed for standard welding torches.
The adapters are not suitable for Up/Down torches or JobMaster welding torches.
20
WARNING!
All activities described in these Operating Instructions may only be carried out by
trained personnel.
Do not carry out the steps described here until you have fully read and understood
these Operating Instructions.
Do not carry out any of the work described here until you have fully read and
understood all of the Operating Instructions relating to the system components, in
particular the safety rules.
WARNING!
Turn the power source mains switch to the "O" position
Disconnect the power source from the mains
Ensure that the power source remains disconnected from the mains until all work
has been completed
CAUTION!
Before carrying out any work on the welding torch, allow it to cool to room tempera-
ture (+25 °C, +77 °F).
CAUTION!
All cables, leads and hosepacks must be properly secured, undamaged, insulated
and adequately dimensioned.