Receiving And Storage - WEG CFW500 Serie Manual Del Usuario

2.5 RECEIVING AND STORAGE

The CFW500 is supplied packed in a cardboard box. On this package, there is an
identification label which is the same as the one attached to the side of the inverter.
Check if:
The identification of the CFW500 matches the model purchased.
„
Any damages occurred during transportation.
„
Report any damage immediately to the carrier.
If the CFW500 is not installed soon, store it in a clean and dry location (temperature
between -25 °C and 60 °C (-77 ºF and 140 ºF)), with a cover to prevent dust accumulation
inside it.
ATTENTION!
When the inverter is stored for a long period, it becomes necessary to
perform the capacitor reforming. Refer to the procedure recommended
in section 6.4 Preventive Maintenance – of this manual.
- English -
General Information
CFW500 | 7