Publicidad
Idiomas disponibles
Idiomas disponibles
Parts identification
a
i
b
c
d
e
A
Main body
a Water inlet
b Trimming height indicator
c Dial (Height adjustment
control)
d Power switch
e Appliance socket
Blade
B
f Cleaning lever
g Moving blade
h Stationary blade
i Mounting hook
中南美向.indb 9
f
k
j
g
l
h
C
Comb attachment for
beard
(1 mm (1/32˝ ) to
10 mm (13/32˝ ) )
AC adaptor (RE9-93)
D
j Power plug
k Charging plug
l Charge indicator
lamp
Accessories
E
Cleaning brush
F
Oil
Charging the trimmer
Make sure that the trimmer is turned off.
1
Place the trimmer on the AC
adaptor.
• Plug the trimmer into the AC adaptor
until it clicks into place.
• Remove the trimmer with one hand
while pressing the AC adaptor with the
other hand.
2
Insert the power plug into a
household outlet.
• The charging time differs depending on the rated voltage.
(See page 16.)
• Check that the charge indicator lamp glows.
3
Disconnect the plug after charging is completed.
(for safety and to reduce energy usage)
• The charge indicator lamp continues to glow after
charging is complete. There is no indication to show that
"charging is complete".
Notes
• To keep charging the battery will not affect battery
performance.
• If there is noise from the radio or other sources while
using or charging the product, move to a different
location to use the product.
• When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
charge the battery once every 6 months.
2
1
9
17/4/6 下午5:45
Publicidad
