Publicidad
114Wa Chef's Dropleaf Island — Parts List (Cont.)
Please identify the parts and check that quantities received match what is on this list.
If you need to replace a part, refer to the following letter and item name.
Part
X
Y
Z
ZA
ZB
ZC
ZD
ZE
ZF
Special Instructions:
If a top or leaf panel becomes cupped, do not be alarmed. The panel was flat when it was manufactured.
It is a natural characteristic of wood in an unfinished state to cup from uneven moisture conditions.
The figure at the right shows an exaggerated view of what could happen. This only means the the
convex side has absorbed moisture or the concave side has dried out.
Usually a cupped panel will equalize and straighten out if both sides are exposed
to similar conditions for a day or so.
Description
#8 x 5/8" Pan Head Screw
Leg Bracket (attached)
Drawer Slide (pre-installed set)
#5 x 5/8" Antique Brass Flat Head Screw
Hinge
#8 x 1" Machine Screw
#10 x 2" Pan Head Screw
#8 x 1-1/4" Pan Head Screw (inserted)
#6 x 1/2" Undercut Type 17 Screw (inserted)
Quantity
16
4
1
18
3
2
2
14
20
Page 3 — 114Wa — 10/13
Publicidad
