Publicidad
BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on
PART DESCRIPTION
AA
Left Leg . . . . . . . . . . . . . . . . . . . . 2
BB
Right Leg . . . . . . . . . . . . . . . . . . . 2
CC
Stretcher . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY INSTRUCTIONS
Before beginning assembly, lay out all the parts to become familiar with their location on
the stool. Note that there are two Left Legs and two Right Legs. When a leg is laying on its
side with the upper hole facing up, the Left Leg will have the lower hole facing left and the
Right Leg will have the lower hole facing right. (See FIGURE 1).
TO ASSEMBLE LEGS AND STRETCHERS:
1) Lay a Left Leg (AA) and a Right Leg (BB) so that the lower holes are facing each other. Apply an
even coat of glue to the holes that are facing each other. Insert a Stretcher (CC). Do the same with
the other pair of Left and Right Legs. See FIGURE 1.
PAGE 2 — 170Wa (Rev. 12/06)
170Wa Café Stool
TOOLS REQUIRED:
the parts list below.
QTY.
BB
Right Leg
FIG. 1
Hammer, Wood Glue.
PART DESCRIPTION
D
Seat . . . . . . . . . . . . . . . . . . . . . . . 1
E
#8 x 1
5
F
#8 x 1¼" Black Screw . . . . . . . . . 8
NOTE:
AA
Left Leg
CC
/
" Black Screw . . . . . . . . . 4
8
QTY.
Publicidad
