WerkaPro 10387 Manual De Instrucciones Y Uso página 16

Chargers
- Use your charger only to charge the battery in the tool provided. Other batteries
may burst, causing injury and damage.
- Never attempt to charge non-rechargeable batteries.
- Do not expose the charger to water.
- Do not open the charger.
- Do not probe the charger..
Functional description and use of the tool
The cordless garden shears can be used for the following applications only to prune
and trim tree branches (maximum diameter 13 mm)
Do not cut any other material such as wire, steel wire, stone, plastic, and that.
Structure of power tools :
Charging the battery
- The charger including the adapter and charger.
- Do not use other battery chargers. The supplied battery charger is designed for
the Lithium-ion battery of your machine.
- Observe the correct mains voltage: The voltage of the power source must
correspond to the voltage indicated on the unit's rating plate. Equipment
marked 230 V can also be connected to 220 V or 240 V.
- The Li-ion battery is protected against deep discharge by the "electronic cell
protection". When the battery is discharged, the machine is stopped by means
of a protection circuit: the inserted tool does not rotate anymore.
- WARNING: Do not continue to press the on/off switch after the machine has
been switched off automatically. The battery may be damaged.
1. Blade
2. Fixed blade
3. Feeding head
4. Decorative covers
5. Socket
6. Trigger
7. Trigger lock
8. Battery