Publicidad
Idiomas disponibles
Idiomas disponibles
© 2022 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
ii.
Wiring Fault
When connected to an incorrectly wired branch circuit outlet, in addition to the
illumination of the Red LED, the LCD Event Monitor will display the following
information:
Wiring Fault
Condition
Line (Hot) / Neutral
Reversed (120V
products only)
Missing Ground
iii.
Abnormal Voltage
When the magnitude of the branch circuit outlet voltage is not acceptable*, the Next
Gen PCS Filter will disconnect power to its outlets and display the following information
on the LCD Event Monitor (*above the over-voltage shutdown threshold or below the
under-voltage shutdown threshold; refer to Section: "Using the Software" for more
information. 120V models with firmware version 2.00 and later will also indicate
Neutral-Ground voltage in excess of 4V):
Voltage Condition
Over-Voltage
Under-Voltage
Neutral-Ground Voltage ≥
4V
Display
rP (Reverse Polarity)
gnd (no Ground)
Display
OFF + OVER
OFF + UNDER
n-g
User Manual
LCD EVENT
MONITOR
LCD EVENT
MONITOR
33
Publicidad
