Publicidad
Idiomas disponibles
Idiomas disponibles
e. Settings Mode
The Settings mode enables the specification of the user-configurable parameters of Next Gen. When this mode is
entered, it displays the parameters currently in use. Firmware versions prior to 1.53 (120V models) and 1.02 (208-
240V models) do not support the Auto Transmit feature.
i. Auto Transmit: Enables/Disables the automatic transmission of status information every 30 minutes. Primarily
intended for use with Remote Portal RP-IP.
ii. Update ID: Sets the product identifier specified in the text box. 10
character limit. This is a temporary setting intended to set an ID for saved reports.
iii. Update Limits: Sets the voltage thresholds specified by the voltage threshold selection fields. Press
Default to select factory default limits.
Note: Restore points may not be specified for Next Gen PCS.
x. Language: Select the software's display language.
xi. Save: Save the current settings for reference.
Limit
When Activated
Over Voltage
V > OV Shutdown
Shutdown
OV Shutdown > V >
Over Voltage
Record
OV Record
Over Voltage
V < OV Restore After
OV Shutdown
Restore
V > UV Restore After
Under
UV Shutdown
Voltage
Under
UV Shutdown < V <
UV Record
Voltage
R
d
Under
V < UV Shutdown
Voltage
Shutdown
© 2022 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
Action
Outlets turned Off and
event recorded
Outlets stay On and
event recorded
Outlets turned On
Outlets turned On
Outlets stay On and
event recorded
Outlets turned Off and
event recorded
User Manual
Factory Default
120V
208/240V
150
260
135
260
140
250
105
190
100
180
0
140
(Disabled)
46
Publicidad
