Publicidad
Idiomas disponibles
Idiomas disponibles
Press UP or DOWN to increases or decrease Bank, the third and fourth digit of LED DISPLAY
shows BANK NO. (01-30)
10.
CHASE 1-CHASE 6
Select desired CHASE to be programmed or run CHASE.
11.
PROGRAM
Turn the power on, it is in MANUAL RUN mode, press PROGRAM for 2 seconds, corresponding
LED blinks, SCENE and CHASE are ready to be programmed, press PROGRAM once more to
return to RUN mode, corresponding LED goes out.
12.
MIDI/ADD
a
Press MIDI key when running, the third and fourth digit of LED flash, select MIDI channel
using UP or DOWN, press MIDI key once more or any other key excluding UP or DOWN
to end the MIDI channel setting.
b
Press this key to make programs when in PROGRAM mode.
13.
AUTO/DEL
a
In RUN mode, press Auto/Del, corresponding LED is ON, which indicates it is AUTO
RUN mode, press once more to withdraw MUSIC mode, corresponding LED goes out.
b
Press this key to make Scene and chase program when in PROGRAM mode.
14.
MUSIC/BANK COPY
a
In RUN mode, press this key, corresponding LED is ON, which indicates it is in MUSIC
mode, press once more to withdraw MUSIC mode, corresponding LED goes out.
b
Press this key to make Scene and chase program when in PROGRAM mode.
15.
TAP SYNC/DISPLAY
a
In AUTO RUN mode, running speed of scene is dependent on the interval of last
two pressing of TAP SYNC/DISPLAY, Max.10 minutes.
b
In PROGRAM mode, select display between STEP and BANK, in other mode;
select display between 00-225 and 0%-100%.
16.
BLACKOUT
Press this key to disable all channel output, but not any other functions. Press once
withdraw Blackout mode.
MIDI IN
Use to receive MIDI data.
17.
DMX POLARITY SELECT
TR-MQ 1000
Pag. 5
English
Publicidad
