JMA SUPRACODE Manual De Instrucciones página 31

2.2 TABLET AND TABLET STAND
• Included in the packaging box are the tablet and its stand.
• Proceed as follows to install the tablet on the machine:
1. Unscrew and remove the two blue knobs located at the top of the machine.
2. Fit the tablet support in the corresponding opening.
3. Clamp the tablet stand with the blue knobs removed previously.
4. Place the tablet on its stand.
• The tablet stand can be adjusted into numerous positions.
2.3 TOOLS AND ACCESSORIES
To facilitate the use of the machine, as well as its maintenance and
adjustment, the SUPRACODE machine is equipped with the following tools
and accessories:
2.3.1 CUTTERS
2.3.2 GRIPS
2.3.3 TRACERS 2.3.4 ENGRAVERS
2.3.5 TOOLS
2.3.6 ACCESSORIES
SUPRACODE
KEY CUTTING MACHINE
31