Emos E0127 Manual Del Usuario página 5

Button Functions
Mode Standard mode
Ther-
Button
mometer
press
button
Show alarm
Mode
time, date
Switch
°C/°F
tempera-
ture units
Switch
°C/°F
tempera-
ture units
Show max/
MEM min tem-
perature
Activate/
ALARM
deactivate
ON/OFF
alarm
SNOOZE/
LIGHT
Operating Instructions
1. Place the two units next to each other.
2. Insert batteries first into the main unit and then into the wireless
sensor.
3. Make sure to insert the batteries with the correct polarity. Use
alkaline batteries only, not rechargeable accumulators.
4. Wait until the thermometer automatically searches and loads the
signal from the wireless outdoor sensor.
5. It will then display outdoor temperature along with
sensor is automatically set to channel no.1 (CH 1) permanently.
6. We recommend placing the sensor on the north side of the house.
The range of the sensor may decrease substantially in areas with
large number of obstacles.
Time settings mode
Button Button
hold press
Time Confirm
settings settings
Search
1 step
for sensor
forward
signal
DCF
reception 1 step back
on/off
Erase
measured
max/min
values
Alarm
settings
Display backlight
5
Settings mode
Button Button
hold press
Faster 1 step
setting forward
Faster
1 step back
setting
Confirm
settings
Button
hold
Faster
setting
Faster
setting
icon. The