BGS technic 7710 Manual De Instrucciones página 3

TOOLS
1 Puller bolt, 29 mm
2 Puller bolt, 23 mm
3 Puller bolt, 17 mm
4 Puller bolt, 11 mm
5 Puller bolt, 9 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties
INTENDED USE
This puller set allows the disassembly of inside bearings. Coming with five puller bolts in different
sizes, this set is suitable for many bearing types not only in cars and motorcycles. Adaptors for a
combined use with slide hammer and two-arm puller expands the range of applications and alleviates
the disassembly.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Regularly grease the thread of the two-arm puller.
•
Always wear protective gloves and goggles when using these tools.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Blind Hole Bearing Puller Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
6 Adaptor bolt
7 Adaptor bolt
8 Adaptor bolt
9 Two-arm puller
10 Slide hammer puller
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 7710