- In case of damaged, broken or worn parts, contact the dealer.
MOUNTING
1. Take all the parts out of the packing box and make sure that all the components are present (see picture below)
2. Insert the legs into the frame by pressing the snap button. Align the pin and the hole until the pin comes out
completely. Adjust the height of the legs, making sure that all 4 legs are set to the same height.
3. Assemble the side frames with the two tubes. Attach the tubes to the side frames using the "C" clip. You can adjust
the width of the product to your liking.
Version Mai 2023
9