Descargar Imprimir esta página

PNI DCH218 Manual De Usuario página 3

Cargador dual con baterías

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Safety instructions
Protect the battery charger from contact with water. Risk of electric shock.
Use the battery charger indoors only.
Do not charge other types of batteries than the recommended one (Li-Ion
7.2V - 18V). Risk of explosion.
Do not attempt to charge non-rechargeable batteries. Risk of explosion.
To ensure charging efficiency, keep the charger and battery terminals
clean.
In case of failure, do not open the charger case. Call a specialized service
center.
Do not use the charger in spaces where explosive substances are stored.
While charging the batteries, the charger may heat up. Therefore, do not
use the battery charger on an easily flammable surface.
Do not supply the battery charger with a different voltage than the
recommended one (100V - 240V).
Unplug the battery charger when not in use.
DO NOT touch the uninsulated terminals of the batteries or the battery
charger.
Do not leave the battery charger out of the reach of children.
Charging the batteries
Warnings:
The batteries come partially charged from the factory. Fully charge the
batteries before using the power tools with which they are compatible.
Lithium batteries can be charged at any time, regardless of the discharge
percentage without affecting their life span.
Instructions
Connect the battery charger to a power source. The green LED will flash.
Insert the battery into one of the two slots on the charger. The red LED
will light up and you will hear a confirmation song for a few seconds.
Note: do not force the battery into the slot on the charger. If it does not
enter, it means that the battery is not compatible with this charger model.
During charging, the red LED remains on.
When the battery is fully charged, the red LED turns off and you will hear
3
User manual

Publicidad

loading