Nilox C3 Manual Del Usuario página 101

Other tightening torques depend on the size of the nuts: M4: 2.5 to 4.0 Nm, M5: 4.0 to 6.0 Nm, M6:
6.0 to 7.5 Nm. Tighten the screws evenly to the required torque.
Regularly check the tires and in particular the condition of the rear tire teeth: wear, cuts, cracks,
pinching. Replace the tire if necessary. Check the rims and the absence of excessive wear,
deformations, blows, cracks...
Revisions
To ensure safety and keep components in good working condition, you should have your e-bike
checked periodically by your dealer. In addition, maintenance of your bicycle should be carried out
regularly by a qualified technician.
First service: 1 month or 150 km
•
Verification of the tightening of the elements: crank, wheel, stem, pedals, handlebars, saddle
clamp,
•
Checking the operation of the electric assistance,
•
Checking and adjusting the brakes,
•
Wheel tension and/or runout.
Every year or 2000 km:
•
Verification of wear levels (brake pads, transmission, tyres),
•
Checking the operation of the electric assistance,
•
Checking the bearings (bottom bracket, wheels, steering, pedals),
•
Cable control (brakes, derailleur),
•
Lighting check,
•
Wheel tension and/or runout.
Every 3 years or 6000 km:
•
Changing the transmission (chain, freewheel, chainring),
•
Checking the operation of the electric assistance,
•
Changing tires,
•
Wheel wear control (spokes, rim),
•
Spoke tension and/or wheel trueing,
•
Change of pads or brake pads,
•
Control of electrical functions.
101