Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALATION
Installation place conditions
01. The use of the gas ranges produce heat and humidity where are installed.
02. Be sure that there is a good air flow, keeping natural air ventilation through a window
or door or by installing a range hood to extracet the air. If ventilation is not good, this
might cause lack of oxygen,what is dangerous for your health and the gas
performance.
03. If the gas range will be working for a long period of time, an extra ventilation will be
necessary to increase the air flow.
04. Air draft should not decrease the good performance of the gas range or cut the gas
flame.
05. To install your gas range to a LPG(Liquefied Petroleum Gas) or NG pie, check if your
house has a gas tap exclusive for the gas range and it this is in good condition.
06. Be sure that your house has an exclusive plug for your gas range and this is in good
conditions.
07. Do not install the range on top of carpets.
08. Do not install the range near the refrigerator, as the excessive heat hinders its yield.
Backsplash assembling (only some models)
Backsplash and the bracket is packed inside the oven Cavity. Unpack the backsplash
and the bracket.
Fix 2 brackets behind the cooktop with 4 screws, and then stand the backsplash on the
bracket.
Fix the backsplash with 3 screws on each side as image shows.
22
Publicidad
