Descargar Imprimir esta página

Linea 2000 DOMO DO737BL Manual De Instrucciones página 36

Máquina para elaborar sopa

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Cleaning
After use, you can clean it using the clean function. Fill the jug with clean water up to the maximum mark.
The appliance will alternately mix and gently heat for 4 minutes. Afterwards, empty the jug, rinse with
clean water, and clean thoroughly as described under 'cleaning and maintenance'.
Smoothie/blend
If your soup does not have the desired consistency, you can continue to mix the soup with this function.
This feature also allows you to use your appliance as a blender to make smoothies, for example. Select
the 'Blend' programme and confirm by pressing the start button. Press and hold the start button until
you have the desired consistency. The blender does not heat with this programme. We advise you not to
use the blend function for longer than 20 seconds at a time. Do not use this feature to mix hard (e.g. ice
cubes) or dry ingredients to prevent damaging the blades.
AUTOMATIC KEEP-WARM FUNCTION
This function automatically keeps the soup warm for 45 minutes once the selected programme has
finished. The programme indicator light will stay on. On the display, you will see light bars moving. The
appliance will switch itself off after 45 minutes and so will no longer keep the soup warm.
Note: this process applies to the chunky and smooth programmes only.
CLEANING AND MAINTENANCE
! Do not place the appliance in the dishwasher.
! Do not immerse the appliance in water.
1.
Fill the blender with clean water after use. Clean your appliance using the Clean function (see Usage
chapter).
2.
Remove the lid and clean with a damp cloth.
! Be careful when cleaning the blade.
3.
Clean the blender with a soft sponge and mild detergent. Do not use scouring pads that can scratch
the bottom. If food is burnt on the bottom, fill the jug with soapy water and let it soak for 15
minutes, and then continue to clean as usual.
4.
After cleaning, dry all parts thoroughly.
PROBLEM AND SOLUTION
Problem
The lights on the display
are off.
The light of the chosen
setting is on, but the
appliance doesn't work.
36
DO737BL
Cause
There is a problem with the
connection.
There are too many ingredients
in the jug, the lid is not in place.
You didn't confirm the setting
with the start button.
Solution
Check if the power cord is properly
connected.
Remove some of the ingredients.
Ensure the lid is in place.
Press the start button.

Publicidad

loading