area. Use this machine at
reasonable times of the day
only (not early morning or
late evening when the noise
could cause disturbance).
• Scrupulously comply with local
regulations for the disposal of
packaging, deteriorated parts
or any elements with a strong
environmental impact; this
waste must not be disposed
of with regular waste, but
must be separated and taken
to collection centres, which
will recycle the materials.
• Comply with local
regulations for the disposal
of waste materials.
• When the machine is
withdrawn from service, do not
dispose of it in the environment,
but take it to a waste disposal
facility in accordance with the
local regulations in force.
Do not throw electrical
equipment away with
domestic waste. According
to the European Directive
2012/19/EU on electrical and
electronic equipment waste and
its implementation in compliance
with national standards, old
electrical equipment must be
collected separately, for eco-
compatible recycling. If electrical
equipment is disposed of in
a landfill or in the ground, the
harmful substances can reach
the water table and enter the
food chain, damaging your
health and well-being. For
further information on the
disposal of this product, contact
your dealer or a domestic
waste collection service.
At the end of their working
life, dispose of batteries
safely in an eco-friendly
manner. Batteries
contain material classified
as hazardous for you and
the environment. They must
be removed and disposed
of separately at a facility that
accepts lithium-ion batteries.
Separate waste collection
of the products and
packaging used allows
the materials to be
recycled and reused. Reuse
of recycled materials help
to prevent environmental
pollution and reduces the
demand for raw materials.
3. ABOUT THE MACHINE
3.1 MACHINE DESCRIPTION
AND INTENDED USE
This machine is a garden tool and more
precisely a battery-powered portable
grass /grass edge trimmer.
The machine is essentially composed of a
motor which, employing a transmission shaft,
drives a cutting means (cutting line head).
The cutting means works on a surface that
is approximately parallel to the ground
(in case of use as grass trimmer) or
approximately perpendicular to the ground
(in case of use as grass edge trimmer.
The operator can operate the machine and
use the main controls, always keeping a
safe distance from the cutting means.
3.1.1 Intended use
This machine was designed
and manufactured for:
– cutting grass and non woody vegetation
(e.g. around the borders of flowerbeds,
plants, walls, fences and small lawns);
– tidy up the cutting done using a mower;
EN - 6