Descargar Imprimir esta página

Craftsman 247.37126 Manual Del Operador página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

B,
Placegrasscatcherintothe slotsin the handlebracketsas
shownin Figure8. Letgo of dischargedoor so that it rests
on the grass catcher.
To removegrasscatcher,lift rear dischargedoor on themower.Lift
grasscatcherup and off the slotsin the handlebrackets.Releaserear
dischargedoor to allowit to close rearopeningof mower,
Attaching
Side Discharge
Cover
Yourmoweris shippedas a rnulcher.Toconvertto side discharge,
makesuregrass catcheris off of the unitand reardischargedoor is
closed.
1.
On the sideof themower,lift the mulchingcover.See Figure9.
2,
Slidetwo hooksof side dischargecoverunder hingepin on
mulchingcoverassembly.Lowermulchingcover.Do not remove
side mulchingcoverat anytime, evenwhen youare not mulching.
f
®
ADJUSTMENTS
Cutting
Height
Thereis a cuttingheightadjustmentleverlocatedabovethe front and
rear rightwheel,
1.
Pull the heightadjustmentleveroutwardtowardswheel(unitwill
tendto fall whenleveris movedoutward).See Figure10,
2.
Moveleverto desiredpositionfor a changein cuttingheight.See
Figure10.
3,
Releaselevertowardsdeck.
IMPORTANT: A ll wheels mustbe placedin the sameposition.For
roughor unevenlawns,moveeachheightadjustmentleverto a higher
position.This will preventyoufrom cuttingthe grass tooclose to the
ground,
Handle
Pitch
Forconvenienceof operation,you mayadjustthe pitch of the handle
as follows:
1,
Removewing nuts and carriagebolts from handle,See Figure11,
2.
Positionthe handlein one of the threepositionsthat is most
comfortable,See Figure11inset,
3.
Secureintopositionwith wingnuts and carriagebolts removed
earlier,
E
Figure11
_J
f
f
12
Figure8
/
Figure9
Higher
Figure10
J

Publicidad

loading