BGS technic 74267 Manual De Instrucciones página 5

ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the
environment. Contact your local solid waste authority for recycling information. Dispose of this
product at the end of its working life environmentally.
Removing the Seal Ring of the Inner Input Shaft (Tool 1)
Use the seal puller (1) to extract the seal of the inner input shaft. Loosen the threaded force screw and
while pressing hard down screw the outer body of (1) into the oil seal of the inner input shaft, ensure it is
screwed in tight. Hold the seal puller (1) and extract the seal by turning the force screw clockwise.
Installing the Seal Ring of the Inner Input Shaft (Tool 2+3)
Place the seal ring guide (2) over the input shaft. Lightly oil the tube and slide the new seal over the
guide tube.
Using the seal ring press tool (3) using a copper mallet to gentle tap the seal into place until (3) touches
the outer shaft tube.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed