BGS technic 74267 Manual De Instrucciones página 6

Removing and Installing the Seal Ring of the Outer Input Shaft (Tool 4+5)
Remove the seal ring of the outer input shaft by using a suitable pick or small screwdriver to lever it out.
Place the seal ring guide (4) over the input shaft. Lightly oil the tube and slide the new seal over the
guide.
Using the seal ring press tool (5) to push the seal ring into place. Use a copper mallet to gentle tap the
seal into place with seal ring press tool (5).
Removing and Installing the Drive Shaft Seal Ring (Tool 6)
Remove the differential output seals using a suitable pick or small screwdriver to lever them out.
Using the seal ring press tool (6) to push the seal ring into place. Use a copper mallet to gentle tap the
seal ring into place with seal ring press tool (6).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed