EFBE-SCHOTT SC GB 904 Manual Del Usuario página 15

OPERATION
First, connect the tanning device to the mains supply.
Switch-on
Turn the timer control knob (3) to the right and set the desired exposure time.
•
The tanning device is switched on and the timer is activated.
•
Once the timer has elapsed, the device switches off automatically.
•
Do not exceed the recommended exposure time!
•
Never continuously expose to UV radiation!
•
Exposure advice
Slightly turn your head to the left and to the right in order to ensure an even tanning.
•
Always wear the safety goggles during exposure to protect your eyes.
•
The lamps only get moderately warm and can be touched without risk even when
•
in use.
Memory knobs
Each user is assigned one of the 4 memory knobs (7).
•
The tanning sessions can be documented and monitored with the help of the
•
memory knobs.
After each exposure, the memory knob needs to be moved one notch further to the
•
next position.
It is possible to set any desired exposure time, regardless of the position of the
•
memory knob.
CLEANING AND CARE
Always unplug the device before cleaning!
•
If required, clean the housing of the device with a damp (not wet) sponge or cloth.
•
Repairs
If the lamps do not light up after switching on, turn the lamps slightly back and forth.
•
If functional devices with non-illuminating but functional lamps are sent in, this
•
does not fall under the warranty.
We are not liable for glass breakage even in the case of a new device, nor for any
•
transport damage to repair devices that have been sent in with inadequate
packaging.
We recommend to keep all parts of the original packaging.
•
Any repairs, including the replacement of the power cord, may only be carried out
•
by the manufacturer, its customer service or a similarly qualified technician in order
to avoid any hazards.
15