Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your new appliance
What you need to have before you
begin
1. Power drill and 1/4" drill bit.
2. 1/2" or adjustable wrench.
3. Flat blade and Philips head
screwdrivers.
1
2
Saddle-type
one 1/4"
Shut Off valve
compression
(1/4" outlet)
4
5
1/4" extension
1 Coupler
tubing
4. You may need to purchase No.1, No.2,
and No.3 parts to complete
connection. You may find these items
sold as a kit at a local hardware store.
Connecting to the water supply line
1. First, shut off the main water supply.
2. Using a power drill and a 1/4" drill bit
drill into the cold-water line and
connect the saddle-type shutoff
valve.
Cold water line
Pipe clamp
Shut off Valve
3. Connect 1/4" extension tubing to
shutoff valve outlet.
Saddle-Type
Shutoff Valve
Packing Nut
Outllet Valve
4. Flush the tubing. Turn the main
3
1 ferrule
(sleeve)
6
2 Clips
5. Connect the extension tubing line
water supply on and flush out the
tubing until the water is clear. Then,
shut the water off at the water valve
after about a quart of water has
flushed through the tubing.
with the line on the back of the fridge
via the coupler. Fully insert the
extension tubing into the coupler,
and then insert the clip onto the
coupler to lock in the tubing. Do the
same with the other end. After both
clips are inserted, check the line to
make sure it is held firmly by the clips.
Clip
Cold water line
Coupler
Note
Ensure that the water line does
not get pinched or bent when
installing.
This can result in improper water
flow through the line and will
affect the functionality of the
fridge.
Compression Nut
1/4" Extension
tubing
Ferrule(sleeve)
Cold water line
18
Publicidad
