Daga CF-100 Instrucciones De Uso página 11

ENGLISH
of time as it could cause skin irritations.
2. Attach one of the 3 heads. The choice of head type to use
depends on your preferences regarding the treatment you wish to
apply:
• Sensitive skin brush: Ideal for smooth cleaning of sensitive skin.
It is recommended for use once a day, and to change it every 3-4
months.
• Exfoliating brush: Ideal for smoothly eliminating impurities in the
skin and dead cells as well as cleaning blackheads from the face. It
is recommended for use 1-2 times a week and to change it every 6
months.
• Cleaning and cleansing brush: Ideal for normal, mixed or greasy
skin, for cleaning once a day. It is recommended to change it every
3-4 months.
3. If you wish to apply any type of cream or balsam during the
treatment you can do it directly onto the skin manually or place it
on the head of the facial cleaner as long as it is not an excessive
amount.
4. Turn on the device and select the rotation mode with the speed
selector (3) located on the upper part of the equipment. Move it to
the first position for a smooth rotation or until the following one for a
more intense rotation.
5. Start the treatment by lightly moving it around the desired area
without excessive pressure nor focusing on a specific area for more
than 30-40 seconds.
6. Avoid applying the treatment close to the eyes, mouth or other
sensitive areas.
7. When you wish to finish the treatment turn off the device by mo-
ving the speed selector towards its initial position (lowest position)
and clean the used heads following the instructions in this manual.
8. Lastly clean your face with plenty of water and gently dry it with
a towel. If you wish you can apply a hydrating cream to enhance the
rejuvenating effect of this treatment.
11
Manual Cepillo Facial.indb 11 20/1/16 10:45