Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
TIMER function ‐‐‐‐ TIMER ON
To automatic switch on the
TIMER
appliance.
When the unit is switch‐off, you can set the
TIMER ON.
To set the time of automatic switch‐on as below:
1.
Press
TIMER
button first time to set
the switch‐on,
and
remote display and flashes.
2. Press or
to button to set desired Timer‐on
time. Each time you press the button, the time
increases/decreases by half an hour between 0
and 10 hours and by one between 10 and 24
hours.
TIMER
3.
Press
button second time to confirm.
4. After Timer‐on setting, set the needed mode
(Cool/ Heat/ Auto/ Fan/ Dry), by press the
MODE
button. And set the needed fan speed,
FAN
by press
button. And press
the needed operation temperature.
TIMER
CANCEL it by press
TIMER function ‐‐‐‐ TIMER OFF
To automatic switch off the
TIMER
appliance.
When the unit is switch‐on, you can set the
TIMER OFF.
To set the time of automatic switch‐off, as below:
1.
Confirm the appliance is ON.
TIMER
2. Press the
button at first time to set the
switch‐off.
Press
or
to set the needed timer.
TIMER
3. Press
button at the second time to
confirm.
TIMER
CANCEL it by press
Note: All programming should be operated within
5 seconds, otherwise the setting will be
cancelled.
will appear on the
or
to set
button.
button.
10
EN - 18
SWING function
SWING
SWING
1. Press the button SWING
1.1 Press
to activate the horizontal flaps
SWING
to swing from up to down, the
on the remote display.
1.2 Press
to active the vertical deflectors
SWING
to swing from left to right, the
on the remote display.
1.3 Do it again to stop the swing movement at
the current angle.
2. If the vertical deflectors are positioned manuall
y which placed under the flaps, they allow to
move the air flow direct to rightward or leftward.
3. For some inverter heating models, press
horizontal SWING and vertical SWING together
button at the same time, it will activate the Self-
Clean function.
Never position the Flaps manually, the delicate
mechanism might seriously damaged!
Never put fingers, sticks or other objects into
the air inlet or outlet vents. Such accidental
contact with live parts might cause
unforeseeable damage or injury.
TURBO function
TURBO
To activate turbo function, press the
button, and
will appear on the display.
Press again to cancel this function.
In COOL/ HEAT mode, when you select TURBO
feature, the appliance will turn to quick COOL or
quick HEAT mode, and operate the highest fan
speed to blow strong airflow.
to activate the louver,
will
appear
will appear
TURBO
Publicidad
