Publicidad
Idiomas disponibles
Idiomas disponibles
HCS Installation and Operation Manual
Additional instructions for plug-in EVSE configurations
•
240 V plugs are specifically designed for occasional relocation, such as moving from one home to another home.
•
For personal safety, the circuit breaker must be turned off prior to plugging in AND/OR unplugging 240 V
appliances (including this EVSE).
•
A high-quality industrial-grade dedicated NEMA outlet receptacle listed to UL 498 (US) and C22.2 No. 182.3-16
(Canada) standards must be used with your plug type EVSE.
•
Before using, make sure the receptacle and plug fit tightly.
•
Do not use this EVSE with an extension cord or wall plug adapter. Plug this EVSE directly into the receptacle.
We recommend that plug-in EVSEs remain plugged into the receptacle.
•
Have an electrician verify all wiring to the outlet is correct and in compliance with local code requirements
before connecting the EVSE.
•
A worn or defective receptacle can cause the plug to overheat and become a fire hazard. Periodically touch
the plug surface during the charge session to see if it is hot to touch. If so, we recommend an electrician check the
connection tightness and replace the receptacle.
•
Ensure that the EVSE is mounted to the wall or placed on a support so it does not hang from the receptacle.
Receptacles are not designed to support the weight of the EVSE.
•
The EVSE shall be installed so that the power supply cord does not contact the floor when plugged into the outlet.
November 2023
IOM-HCS-140-00277-03
© 2024 Enphase Energy Inc. All rights reserved.
7
Publicidad
