Tunturi T40 Manual Del Usuario página 22

English
I you require spare parts, always give the model, serial number o
your equipment and the spare part number or the part you need.
The spare part list is at the back o this manual. Use only spare parts
mentioned in the spare part list.
Metric/ Imperial setting
When displayed speed is not matching your expectation the machine
might be set in incorrect setting.
Metric: Min./ Max. speed/:
1.0 Km/h/ 16.0 Km/h.
Imperial: Min./ Max. speed/:
0.6 Mls/h/ 10.0 Mls/h.
Switch units by:
Take o saety key. ( Console show E7)
Press and hold "Prog" & "Mode" button or 3 seconds.
Console shows shortly:
- 0.6 When switched to Imperial mode.
- 1.0 When switched to Metric mode.
Put Saety key back in position.
Error codes
I the display shows an error code
(marked with "E" + number), restart the equipment and check
whether the display still shows the error code. I the display still shows
the error code, immediately contact the dealer.
‼ NOTE
• E7 is not an error code, see "Saety key"
Transport and storage
⚠ WARNING
• Beore cleaning and maintenance, remove the mains plug rom
the wall socket.
• Carry and move the equipment with at least two persons.
• Make sure that there are no other persons or objects under the
equipment.
• When olding the olding the equipment, make sure that you
hear the equipment lock into position to prevent the equipment
rom dropping back down.
⚠ CAUTION
• Beore olding the equipment, make sure that the incline is 0%.
I the incline is not 0%, olding will damage the mechanism.
- Move the equipment as shown (ig. F3). Move the equipment
and careully put the equipment down. Place the equipment on
a protective base to prevent damage to the loor surace. Move
the equipment careully over uneven suraces. Do not move the
equipment upstairs using the wheels, but carry the equipment by
the handlebars.
- Store the equipment in the upright position (ig. F1). Store the
equipment in a dry place with as little temperature variation as
possible.
Additional information
Packaging disposal
Government guidelines ask that we reduce the amount o waste
material disposed o in land ill sites. We thereore ask that you
dispose o all packaging waste responsibly at public recycling centres.
End of life disposal
We at Tunturi hope you enjoy many years o enjoyable use rom your
itness trainer. However, a time will come when your itness trainer will
come to the end o its useul lie. Under 'European WEEE Legislation
you are responsible or the appropriate disposal o your itness trainer
to a recognised public collection acility.
Technical data
Parameter Unit of measurement
Mains voltage VAC
Mains requency HZ
Motor HP
Speed Km/H
Speed Mph
Incline Step
Length (olded) Cm
Length (olded) Inch
Width Cm
Width Inch
Height (olded) Cm
Height (olded) Inch
Weight Kg
Weight Lbs
Max. user weight Kb
Max. user weight Lbs
HR. receiver Khz
Declaration of the manufacturer
Tunturi New Fitness BV declares that the product is in conormity with
the ollowing standards and directives: EN 957 (HC), 89/336/EEC. The
product thereore carries the CE label.
08-2019
Tunturi New Fitness BV
Purmerweg 1
1311 XE Almere
The Netherlands
Disclaimer
© 2019 Tunturi New Fitness BV
All rights reserved.
The product and the manual are subject to change. Speciications can
be changed without urther notice.
2 2
Value
210~240
50~60
1.5
3.5 Max.
1.0~16.0
0.6~10.0
0~12
155.0
(87.0)
61.0 (34.3)
74.0
29.1
137.0 (139.0)
53.9 (54.7)
62.0
136.6
120
265
5.3 Khz