Joerns Oxford Mini Manual De Instrucciones página 7

English
5. Electric Leg Operation: There is some minor assembly required in order to connect the
leg actuator to the leg adjustment mechanism. Gently swing the actuator into place over the
leg pivot bracket ensuring the corresponding holes are in alignment. Insert the clevis pin,
ensuring the plastic wear washers remain in place. To finish, fit the spring clip through the
hole in the clevis pin and confirm secure attachment.
Clevis pin
Foot Pedal Leg Operation: If your lift is fitted with foot pedal operated legs, release the
brakes and confirm they open and close satisfactorily by operating the push pedals (Fig. 7).
Hold onto the push handle for stability.
Push Pedal (Open)
Spring clip
Push Pedal (Close)
Oxford
®
Classic Lifts
Fig. 6
Fig. 7
7