English
English (original instructions)
Español (traducido de las instrucciones originales)
Français (traduction de la notice d'instructions originale)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or
property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property
WARNING: To reduce the risk of injury, read and understand these safety warnings and instructions before using the product. Keep these
instructions for future reference.
1
16
31
WARNING
WARNING
system.
WARNING
information for all authorized users.
WARNING
WARNING
WARNING
instructions before each use. Inspection of equipment should be done at least annually by
a Competent person and the results recorded in the inspection log.
WARNING
equipment and system.
WARNING
in this manual, it becomes the responsibility of the user to undergo proper training on
the proper inspection, use and maintenance of this equipment. It is also the employer's
responsibility to ensure that all users are trained in proper use, inspection and
maintenance of Fall Protection Equipment.
WARNING
between the anchorage and a fall protection, work positioning, rope access, or rescue
system for the purpose of coupling the system to the anchorage. So, the term "anchorage
connector" mentioned anywhere in the UIM would be applicable only for DXFP845101.
WARNING
helps majorly in preventing serious injuries. It is vital for the end users to read and
understand the User Instructions provided for correct usage and maintenance of this
product. Since misuse or failure to follow the instructions properly may cause serious
injury or even death, thus all the users are required to know the instructions, operation,
damage.
limitations and consequences of wrong usage of the equipment and have a proper
training initially before using as per OSHA 29 CFR 1910.66 and 1926.503 or applicable
local standards.
CANCER AND REPRODUCTIVE HARM-WWW.P65WARNINGS.CA.GOV
:
Read and follow the manufacturer's instruction for each component of the
:
Do not remove product labels which include important warnings and
:
Always have a Rescue Plan ready and at hand when using this equipment.
:
DO NOT ALTER THE EQUIPMENT IN ANY WAY.
:
It is important to inspect the equipment according to the manufacturer's
:
Every individual requires formal training in the use of fall protection
:
In order to ensure that the user is familiar with the instructions provided
:
The anchorage connector, DXFP845101, works as the primary interface
:
In case of fall arrest, emergency rescue systems and compliant fall protection
:
English
1