HOLZMANN MASCHINEN FKS400V32PRO 400V Instrucciones De Servicio página 46

A
mm
4960
Preparation of the surfaces
Before putting the machine into operation, carefully remove the corrosion protection or grease
residues from the bare metal parts. This can be done with the usual solvents. Under no
circumstances should you use nitro thinners or other cleaning agents, as these can attack the
machine´s finish.
The use of paint thinners, petro, aggressive chemicals or scouring agents will damage
the surfaces!
Therefore: Use only mild cleaning agents!
14.2 Assemble
 The machine and machine parts are heavy!
 At least 2 people are required to set up the machine.
The machine has been disassembled for transport and must be reassembled before use.
HOLZMANN Maschinen GmbH
B C
6990 1350 3060
www.holzmann-maschinen.at
D E F
2220 3200
N O TE
N O TE
ASSEMBLY
G H
895 1700 40°
FKS400V32PRO_400V
I
46