HOLZMANN MASCHINEN FKS400V32PRO 400V Instrucciones De Servicio página 52

Height and angular inclination of the saw blade
 Adjust the riving knife and the saw blade guard to the position of the saw
blade!
 Adjust the rip fence or the cross-cut fence so that it does not touch the inclined
saw blade.
Scoring saw blade basic adjustment
HOLZMANN Maschinen GmbH
NOTE:
be adjusted so that it cuts a slot with a depth of 1.5 -
2mm.
www.holzmann-maschinen.at
Height of the saw blade
On display:
- Push key (1) .
- Push key (2) .
On control panel:
- Push button saw blade height up (3) to .
- Push button saw blade height down (4) to .
The saw blade should protrude approx. 5 mm above
the workpiece.
NOTE:
The height of the scoring blade will be
automatically set after switch on the scoring blade
Angular inclination of the saw blade
- Push key (7).
- Enter desired angle in the keybord.
- Push key (8) and the saw blade moves the the
entered position
NOTE: In order to determine the correct position, the
1 adjustment must be made at 45°
st
N O TE
Heihght of the scoring saw blade
- Loosen screw (1)
- Turning the setting screw (2) to the left .
- Turning the setting screw (2) to the right .
- Fix screw (1)
Lateral adjustment of the scoring saw blade
- Turning the setting screw (3) to the left
- Turning the setting screw (3) to the right
When using the scoring blade, the height must
ASSEMBLY
.
.
52
FKS400V32PRO_400V