Fuse Check/Replacement - Clarke Vantage 17 B Instrucciones De Uso

FUSE CHECK/REPLACEMENT

1. Disconnect the battery connector (29).
2. Remove the screws (A, Fig. 10), then carefully remove the electrical component box cover (B).
3. Check the following fuses for integrity:
• (C): F1 (40 A) circuit breaker, brush motor
• (D): F2 (30 A) blade fuse, vacuum system.
• (E): F3 (5 A) blade fuse, solenoid valve and electronic board
• (E): F4 (20 A) glass fuse, brush disengagement system
4. Replace the fuse, when the component that caused deactivation has fully cooled down.
A
B
A
Figure 10
INSTRUCTIONS FOR USE
9099650000 - VANTAGE 17 B
ENGLISH
F
C
E
D
P100647
23