Publicidad
Idiomas disponibles
Idiomas disponibles
1.- ANT A/B: antennas for signal reception of A and B channel microphones with diversity technology.
2.- AUDIO OUT (UNBALANCED): audio signal output of the mix of both channels A and B, 6.3 mm
unbalanced jack connector.
3.- AUDIO OUT (BALANCED): audio signal outputs for each independent channel A and B, balanced XLR
connectors.
4.- POWER IN: power input 12 V DC, 1 A.
SONAIR-PRO-1M TRANSMITTER
1.- Information display showing the transmission frequency.
2.- IR: IR sensor for synchronisation of the transmission channel (frequency).
: microphone on/mute/off button. Short press to turn on and long press to turn off the microphone. If
3.-
it is on, short press to mute the audio and press again to restore it.
4.- Battery holder for 2 AA batteries. The use of rechargeable batteries is also possible.
SONAIR-PRO-1P TRANSMITTER
1
2
3
1.- RF antenna.
2.- Information display showing the transmission frequency.
3.- Battery holder for 2 AA batteries. The use of rechargeable batteries is also possible.
4.- IR: IR sensor for synchronisation of the transmission channel (frequency).
5.- Attachment clip.
6.- POWER: microphone turn on LED power indicator.
7.- ON/OFF: 3-position microphone power selector: microphone ON, audio mute and microphone OFF.
8.- -VOL+: microphone audio volume control.
9.- Microphone plug, miniXLR connector.
10.- Clip-on belt-pack microphone. MiniXLR connector (PIN 1: ground, PIN 2: not connected, PIN 3: signal).
1
2
1
2
CH
CH
B
B
MHz
MHz
4
IR
3
CH
CH
B
B
MHz
MHz
4
IR
3
4
CHANNEL
MHz
1 2
3
CHANNEL
MHz
1 2
3
4
10
5
POWER ON
6 7 8 9
5
- 3 -
1
4
PIN 3
PIN 1
PIN 2
OFF
10
-VOL+
PIN 3
POWER ON
OFF
-VOL+
6 7 8 9
EN
PIN 1
PIN 2
Publicidad
