FONESTAR KS-08WIFI Manual De Usuario página 5

- CABLE: the smartphone connects via Wi-Fi to the router. The speakers are connected via
1
cable. The speakers will connect to each other via wired local area network instead of Wi-Fi
extending the range of the "multiroom"function. 2
2
Once the speakers have been grouped together, it will be possible to make different confi gurations
3
for each of the speakers in the group via the APP so that they play the right (R), left (L) audio or
work normally in the right (R) or left (L) audio mode. If the Wi-Fi network has internet access all
4
services on the APP will be available.
Choose which will be the main speaker and press its
5
of each speaker, then the APP will allow you to select the slave speakers. Finally, select the audio
6
to play and volume settings you want. For more information, download the APP user guide from
our WEBSITE at fonestar.com/en/KS-08WIFI.
7
NOTE: to facilitate the initial confi guration when setting up the Wi-Fi network, it is recommended to
8
do it one at a time, i.e. only have the one you are going to set up switched on and the rest switched
off.
c.- ACCESS POINT: the smartphone connects to the speaker's Wi-Fi network. If you fi rst connect the
speaker to a local network with internet (via Wi-Fi or cable), all online radio services, Spotify online,
etc. will be available.
To use this mode, open the Wi-Fi network settings on your mobile device and connect to the Wi-
Fi network of the KS-08WIFI_xxxx speaker. Finally, open the APP, select the audio to play and
volume settings you want.
- Wi-Fi CONNECTION NOTES:
IMPORTANT: keep your smartphone and speaker close to the router.
3
NOTA: to make it easier to set up the Wi-Fi network for the fi rst time for several speakers, it is recommended
to do it one by one, i.e. have only the one you are going to set up switched on and the rest switched off.
Also, it is advisable to place speaker and router nearby.
NOTE: if the network of the KS-08WIFI_xxx speaker does not appear as an available network in the Wi-Fi
settings of your smartphone, press the WPS button for 3 seconds. The voice-over will say "ENTERING
SETUP MODE, FOLLOW THE INSTRUCIONS IN THE APP TO FINISH THE SETUP".
NOTE: if the speaker does not appear in the APP, restart the APP or disconnect and reconnect the
smartphone to the Wi-Fi network.
1.- With your smartphone connected to the network via Wi-Fi, turn on the speaker and open the APP on
your smartphone.
2.- If this is the fi rst time, the speakerphone will not be found and you will have to perform the network
confi guration on the speakerphone. First-time setup requires several steps that we detail in the APP
guide. For more information, download the APP user guide from our WEBSITE at fonestar.com/en/
KS-08WIFI.
bluetooth MODE
3.- The APP will search for compatible devices connected to the same network and, if you have already
connected it before, the speaker will appear directly, after a few moments, the voice-over will say
CONNECTED TO YOUR Wi-Fi NETWORK.
OPERATING MODES: AUX IN
Connect an auxiliary signal (PC, mixer, TV, etc.) to the AUX IN connector on the rear panel of the speaker
and select AUX mode by pressing MODE or via the APP, if the speaker has been previously connected to
Wi-Fi network. The voice over will say A-U-X MODE.
- Select the music on your external player and start playback.
ACTIVE
SPEAKER
ACTIVE
SPEAKER
AUX MODE
(OPTIONAL)
ROUTER
KS-08WIFI
(ACTIVE)
AUDIO CABLE
button on the APP in the upper right corner
24 V DC,
3 A
KS-08WIFI
(ACTIVE)
KS-08WIFI
(ACTIVE)
A: DIRECT
B: SINGLE
C: Wi-Fi MULTIROOM (group)
D: ETHERNET MULTIROOM (group)
- 5 -
MODE
AUX IN
WPS (3 s)
EN
PASSIVE
SPEAKER