Livoo DOC303 Manual De Instrucciones página 17

41. The parts sealed by the manufacturer or his
agent shall not be manipulated by the user.
Although this appliance has been manufactured to avoid sharp edges, care should be taken when
handling all parts to avoid the risk of injury.
Remove all protective packaging and keep it away from children. Read the safety instructions carefully
before you start using your appliance.
Make sure that no parts or pieces are missing or damaged/broken, which could impair the proper
functioning of the appliance. The guarantee for this appliance cannot be applied for abnormal
conditions of use, incorrect storage conditions, lack of maintenance, modification of the product, use for
professional purposes, etc.
Ignition
Make sure that the appliance is positioned on a stable, flat surface.
Wear protective gloves.
CAUTION: This product will become very hot. Do not move it during use.
This product is intended for use with bottled gas only.
A regulator in accordance with ENEN 16129:2013 of 28 mbar must be used for butane gas or 37 mbar for
propane gas.
Never use an adjustable regulator with the product.
Make sure that the regulator is correctly set so that the supply pipe and valves are filled with gas.
Otherwise, the burners will not have enough power and will not light or will cut out regularly.
If you need to replace the gas cylinder, make sure that the appliance is switched off and that there is
no source of ignition nearby (spark, cigarette, open flame, etc.).
Make sure that the gas hose is not twisted, stretched, bent or kinked to allow free flow of gas.
Use of the device
Protect your hands when cooking with protective gloves.
Installation
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.
Connect the hose and regulator to the gas container
device. Keeping in mind that the gas container must be kept away from heat and in a safe position .The
hose dimension is 10mm diameter. The Length of hose recommended which shall not exceed 1.5m.
Please choose flexible hose whose heatproof higher than 80℃
How to connect a gas bottle
This appliance is only designed for use with low-pressure butane, propane or their mixture of gases and
a suitable low-pressure regulator using a flexible hose. The hose must be secured to the regulator and
the appliance (threaded fittings).
Note : For other countries, cylinder and regulator are dependant on the National Situations in countries of
destination.
Start-up
Open the appliance cover.
To light the burner, push in the knob and turn it anti-clockwise to the "on" position. Press the piezo button
until the gas ignites.
to the G1/2 threaded connection at the back of the
www.livoo.fr