Black and Decker BHSMP2008 Manual De Instrucciones página 8

ENGLISH
If the home circuit breaker activates
u
while using the steam function,
discontinue product use immediately
and contact the customer support
centre. (Beware of the risk of electrical
shock.)
The appliance emits very hot steam to
u
clean the area of use. This means
that the steam head, cleaning pads
and attachments get very hot
during use.
Caution! Always wear suitable shoes
when using your steam mop and when
changing the accessories on your steam
mop.
Do not wear slippers or open toed
footwear.
The lid may become hot during use.
u
The surface of the nozzle may become
u
hot during use
Steam may escape from the appliance
u
during use. Care should be taken
when using this appliance. DO NOT
touch any parts which may become
hot during use.
If steam is observed escaping from the
u
body of the steam mop, switch off and
disconnect the unit from the mains
supply, allow to cool.
Contact your nearest authorised repair
agent.
If steam is observed escaping from the
u
pressure relief valve (21), switch unit
off, disconnect the unit from the mains
supply, wait for one hour for the
appliance to cool, and then unscrew.
Check the condition of the seal on the
pressure relief valve.
8
(Original instructions)
If the seal is in good condition, screw
back on completely to a tight fit.
If steam continues to escape from the
cap contact our nearest authorised
repair centre.
DO NOT CONTINUE TO USE THE
APPLIANCE.
After use
Unplug the appliance and allow to cool
u
before cleaning.
When not in use, the appliance should
u
be stored in a dry place.
Children should not have access to
u
stored appliances.
Residual steam is under pressure in
u
the hose once the unit is switched off.
Please allow the unit to cool before
pressing the trigger
Inspection and repairs
Unplug the appliance and allow to cool
u
before performing any maintenance or
repairs.
unplug the appliance and allow to
u
cool, check that there is no steam in
the system by activating the steam
trigger on the steam handle (11)
before unscrewing the pressure
relief valve (21). The pressure relief
valve should never be unscrewed
until the appliance is cooled and
no steam left in the system. Screw
back on completely to a tight fit after
maintenance.
Before use, check the appliance for
u
damaged or defective parts.