Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Important: tighten the locknut by turning it anti-clockwise towards the appliance
casing.
Connecting the water supply
NOTE:
•
Connect the water supply inlet hose in accordance with the regulations of
your local water company.
•
Water tap: 3/4" threaded hose connector.
•
Water pressure (flow pressure): 100-1000KPa (1-10 bar).
•
Only use a new inlet hose for connecting the washing machine to the water
supply. Used hoses must not be reused. They should be discarded.
1.
If the water inlet hose is not already installed, it must be screwed to the appliance The
blue marked hose is only for cold water.
2.
Screw by hand the inlet hose onto the tap, tightening the nut.
Cold
9
EN
Publicidad
