Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Attention:
•
No kinks in the hose!
•
The appliance must not be connected to the mixing tap of an un-pressurized
water heater.
•
Check water-tightness of connections by turnning the tap completely on.
•
If the hose is too short, replace it with suitable lenght of pressure resistant
hose .
•
Check the inlet hose regularly for brittleness and cracks and replace it
necessary.
•
The washing machine can be connected without a non-return valve.
For Models with Single Inlet
Fix the inlet hose to the cold water tap and to the inlet valve on the rear side of the machine
as Fig. 1.
Ensure that:
•
All connections are tightly fixed.
•
Do not allow children to operate, crawl on, be near or inside your washing
machine.
•
Note that during the wash cycles, the surface temperature of the porthole
door may increase.
•
Close supervision of children is necessary when the appliance is used near
children.
Inlet valve
Fig.1
10
EN
Cold fill
Publicidad
