Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Prewash
•
Select the function to conduct pre-wash so as to enhance washing effects and better
remove stains. This function is suitable for heavy dirt clothes.
Before inflowing, laundry detergent/washing powder can be added to pre-wash box, and
main wash box must be added with washing powder.
Spin
•
The programme defaults to the partial max. spin speed.
•
Press buttons to select other spin speeds.
If spin speed « 0 » selected, the last spin process will be canceled and the machine only
•
dewaters before the end of programme.
Temp.
•
Each programme is corresponding to its default temperature. If needed, press «Temp.»
button to adjust.
Extra rinse.
•
After set the function of rinsing adding, the program runs the rinsing process once
again before running the softening, and the total running time of the program increases
accordingly.
Delay End
•
Delay End function allows to run the machine at the consumers convenience, for example,
at night when electricity is cheaper.
•
Select programme, temperature and options.
•
In standby mode, press and hold «Temp.» + «Spin» to enter or cancel the Delay end
mode, press «Temp.» to reduce the reservation time, and press «Spin» to increase the
reservation time. After reservation function is selected, «Temp.» and «Spin» can no longer
change the program slave parameters. Each time the key is pressed, time changes for
1 hour. The delay time must be longer than the wash program length as the delay time
is the time program will finish. For example: if the selected program time is 00:28, the
delay time selected must be between 01:00 and 24:00.
•
When the reservation process is operated, the icon of 'reservation time' will be on. When
the reservation process is finished, the icon of 'reservation time' will be off, while the icon
of the 'remaining time' will be on.
To cancel Delay End, turn programme selector to another programme position, before
•
pressing «Start/Pause» button.
Programme Start
•
Switch on and select programme required and corresponding function keys, then press
the «Start/Pause» button to run the programme.
Reload in process
Press «Start/Pause» button to reload clothes in the process of washing.
•
If the door can be opened in the process, door lock indicator light will flashes. Until door
lock indicator turns off, you can open the door to load clothes.
20
EN
Publicidad
