Descargar Imprimir esta página

Zamel Supla mSLW-02 Manual De Instrucciones página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
2. WARNING
CAUTION
understood this User Manual and the product features.
Prior to installing and wiring this product, make sure that
the wiring to be connected is not live! The device is designed
for indoor installation. During installation, make sure that the
device is not exposed to direct contact with water and that it
does not operate in a humid environment. When installed out-
doors, the device should be placed in an additional enclosure
of hermetic type and protected against water penetration – in
particular where connection terminals are located. Do not
open or otherwise disassemble the product enclosure; oth-
erwise the product warranty will be void and an electrocution
hazard may occur. The conditions and methods of transport,
storage and operation of this product may affect its perfor-
mance. Do not install the product if any of its components is
missing, the product is damaged or deformed in any way.
If any malfunctions are found, consult the manufacturer.
The device must be connected to power
supply in accordance with applicable electri-
cal and safety standards or regulations. See
this User Manual for the wiring instructions.
Installation, wiring and setting of this
product shall only be done by qualified
electrical engineers who have read and
24

Publicidad

loading

Este manual también es adecuado para:

Supla mslw-01