Zamel Supla mSLW-02 Manual De Instrucciones página 35

ZAMEL-mSLW-02
CAUTION!
If the connected device is not shown on the list immediately
once the configuration is complete, check the device
STATUS LED. When added for the first time, the STATUS LED
of some devices may flash very fast and irregularly. This
happens when the device controller is updating its firm-
ware. A moment after the update, the STATUS LED should
go on steadily which means there is an active connection
with the server.
DEVICE ADDED SUCCESSFULLY
Adding a device is simple and
should end without any prob-
lems. If the device is added suc-
cessfully, the following message
is displayed: "Device configura-
tion successful". Tap OK. Now,
the supla app should display
the device which you have just
added on the list. The mSLW-02
STATUS LED in the front goes on
steadily when the connection
with the server is active.
10
35