WEG CF W100 Serie Manual Del Usuario página 7

DANGER!
Connectors XCA and XCB do not present USB compatibility; therefore, they cannot be connected
to USB doors.
These connectors serve only as interface between the CFW100 frequency inverter and its accessories.
NOTE!
Frequency Inverter may interfere with other electronic equipment. In order to reduce these effects, take
„
the precautions recommended in the
Read the user's manual completely before installing or operating the inverter.
„
Do not perform any withstand voltage test!
ATTENTION!
Electronic boards have components sensitive to electrostatic discharges.
Do not touch directly on components or connectors. If necessary, first touch the grounding point of
the inverter, which must be connected to the protection earth (PE) or use a proper grounding strap.
DANGER!
This product was not designed to be used as a safety device.
Additional measures must be taken so as to avoid material damages and personal injuries.
The product was manufactured under strict quality control; however, if installed in systems in which its
failure causes risks of material or personal damages, additional external safety devices must ensure
a safety condition in case of such failure, preventing accidents.
Chapter 3 INSTALLATION AND CONNECTION on page
If necessary, contact WEG.
Safety Instructions
12.
CFW100 G2 | 7