GreenWorks GD60BCB Manual Del Operario página 9

EN
1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. You cannot use the machine to cut or
chop hedges, shrubs, bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 30.
Battery release button
1
On/off button
2
Speed button
3
Lock-out button
4
Trigger
5
Auxiliary handle
6
Upper shaft
7
Coupler
8
Lower shaft
9
Trimmer head
10
Cut-off blade
11
Guard
12
Release button
13
Positioning hole
14
Hex wrench
15
Knob
16
Cap
17
Lower support
18
Tab
19
Spool cover
20
Spool housing
21
Spool
22
Line exist hole
23
Slot
24
Angle transmission hole
25
Metal rod
26
Nut
27
Outer cup
28
Blade
29
Direction of roatation
A
Best cutting area
B
Dangerous cutting area
C
English
2 GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
3 SAFETY
Make sure that you follow all safety instructions.
Refer to Safety Manual.
4 INSTALLATION
4.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in
compliance with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
4.2 ATTACH THE GUARD
Figure 2.
4
WARNING
WARNING
WARNING
WARNING
WARNING