Cleaning and Maintenance
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can result in damage to the vacuum cleaner itself.
Never immerse the handheld vacuum cleaner in water to clean and do not clean with a steam cleaner.
Ensure that no liquids get inside the cleaning unit.
Ensure that all parts, especially the filters, are completely dry before reassembling the handheld
vacuum cleaner after cleaning.
Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic
cleaning tools such as knives, hard spatulas and the like. These may damage the surface.
Clean all parts of the handheld vacuum cleaner regularly to avoid blockages and to guarantee the
functional capacity of the handheld vacuum cleaner.
Emptying the dust container
NOTE!
Empty the dust container after every use to avoid blockages and to maintain the functionality of the
hand-held vacuum cleaner.
1. Switch the handheld vacuum cleaner off.
2. Loosen the container by turning it anti-clockwise and remove the dirt.
3. Reattach the dust container to the main appliance by turning it slightly clockwise. Also note the lock symbols.
Remove filter
1. Remove the dust container.
2. Loosen the filter by turning it slightly anti-clockwise.
3. Hold the stainless steel filter and turn the HEPA filter slightly anti-clockwise to separate the two filters.
4. To reinsert, first insert the HEPA filter into the stainless steel filter and turn clockwise to tighten. Then connect
the filter unit to the main unit by turning it slightly clockwise.
Cleaning
1. Wipe the dust container with a damp cloth.
2. Clean the HEPA filter with a soft brush or tap it to clear it.
3. If required, the HEPA filter can be rinsed under running water.
4. Wipe the outside of the hand-held vacuum cleaner with a dry cloth.
5. Leave all the parts to dry fully before reassembling the hand-held vacuum cleaner after cleaning.
Instruction manual
GB
21