LEBENLANG LBL2319 Manual Del Usuario página 17

• The kettle body used must be match with the kettle base.
• Caution. The appliance becomes very hot. Risk of scalding through
escaping steam. Hold the hot kettle only by its handle and do not
open the lid to pour out water.
• Warning: If the kettle is overfilled, boiling water may be
ejected.
FIRST USE OF THE MACHINE
Before using the machine for the first time water should be boiled in it
twice without any additives.
1. Fill the kettle with water. Do not overfill Use the water level
indicator.
2. Place the kettle flush on the base.
3. Electrical connection:
Ĕ Check whether the electrical voltage that you intend to use is
the same as that of the kettle. Details are to be found on the
label on the base.
Ĕ Only connect the kettle to a properly installed 220-240V
50/60Hz safety socket.
4. Press the ON/OFF switch to the ON position. The Indicator Light will
illuminate indicating that the boiling process has begun.
5. After boiling the kettle switches off automatically.
17