Publicidad
Idiomas disponibles
Idiomas disponibles
Using the product for the first time
1. Choose a suitable place where you want to use the vanity mirror with the wall mount. Please make sure that
you attach the holder to a suitable surface.
2. Please note and follow the enclosed tesa
3. Use the supplied USB cable to charge the battery.
4. You will find the USB-C port on the back of the mirror. Plug the USB cable into the mirror and connect the
other end to a power source. It takes about 2 hours until the battery is fully charged.
5. When charging, a red light will appear on the back of the mirror; when the mirror is fully charged, it lights up
green.
6. The product cannot be used while charging.
7. Once fully charged, the product can be used for approximately 6 hours.
Use
Using the lighting function:
– Tap the ON/OFF button once to switch on the mirror's lighting function.
– While the light is on, press and hold the ON/OFF button to adjust the brightness (dimming function).
– To change the colour temperature (cool-natural-warm), press the ON/OFF key twice.
– If you no longer need the mirror lighting, press the ON/OFF key once to switch it off.
Cleaning
Clean the item with a damp cloth only.
Maintenance
It is not possible to replace the LEDs. It is not possible to replace the battery.
Disposal instructions
Details on proper disposal are usually governed by national legal regulations. The crossed-out bin symbol
indicates that electronic devices and batteries must not be disposed of with household waste at the end of their
useful life. The reuse or recycling of electronic equipment is an important contribution to the protection of hu-
man health and the environment. If you decide to dispose of the device or battery, please follow the respective
national regulations and contact or use the available return and collection systems.
16
PowerKit mounting instructions for attaching the mount.
®
Publicidad
