BATTERY CHARGE
- The battery must be charged to 100% before first use.
- The charger used must be 5V and have an amperage of up to 2A maximum.
- When plugged in to charge, a red light comes on indicating "charging".
The pilot light goes out when charging is complete.
- Charging should never be interrupted once plugged in to charge.
- The charging time will depend on the amperage of the charger used.
- Do not turn on the speaker while it is charging.
- If you are not going to use the speaker for a while, you should keep the battery charged.
Charge the battery at least once a month.
If the battery runs out of charge it can be damaged.
CONNECT TO BLUETOOTH DEVICE
Turn on the speaker and turn on your Bluetooth mobile device, then search for the
speaker model name "GR-63" and select it to pair.
Once the Bluetooth is paired, the speaker will automatically connect the next times it is
turned on.
BLUETOOTH MODE
The speaker directly enters Bluetooth mode when you turn it on. After pairing the device,
you can play the music, short press ►ll to play/pause, press ◄◄ and ►► to
previous/next song.
Long press - / + to decrease or increase the volume.
TWS FUNCTION
Two the same model speakers can be connected to one wireless device at the same
time. First, turn the speakers on and keep the speakers all in Blue-Connect Mode, then
choose one unit and Double-press ►ll button; then you will hear the sound of "Du~" to
indicate that the two units have paired successfully. Please ensure before pairing that the
two units are not connected with other devices.
USB/TF MODE
Insert a MicroSD card into the TF slot or a pen drive into the USB port,
the speaker will read the music in MP3 format automatically. Press ►ll to Play / Pause,
short press ◄◄ and ►► to previous or next song.
Long press - / + to decrease or increase volume.